Kesari Injection Systems

Kesari Injection Systems is proposed as a specialist category for injection-based waterproofing and repair applications. The final website copy should differentiate each system by chemistry, substrate condition, moisture state, crack or void condition and intended performance based strictly on the approved Product TDS. Until those documents are available, product-level technical claims should remain unpublished.

Category Overview

What It Does

This category is intended to organise Kesari Conchem’s injection-grout products within a single technical selection page. Exact performance functions, injection behaviour, curing mechanism and suitability for water-stopping, crack repair or structural bonding must be confirmed from the approved TDS before publication.

Where It Is Used

Application environments are not documented in the supplied brochure for these products. Final website applications should be populated only from the approved TDS for each injection grout.

Why It Matters

Injection products are highly application-sensitive. Correct product selection depends on the actual defect, substrate condition and moisture state. For this reason, the category page should prioritise technical selection guidance and direct users to the approved TDS rather than rely on generic product claims.

Selection Considerations

Confirm whether the substrate condition is dry, damp or actively wet from the approved TDS.
Confirm whether the product is intended for waterproofing, sealing, crack repair, void filling or structural bonding.
Confirm whether the system is one-component or two-component and preserve the approved nomenclature.
Confirm substrate compatibility and injection equipment requirements.
Confirm crack width, viscosity, reaction / cure behaviour and application limitations from the TDS.
Confirm pack size, shelf life, storage and safety information before website publication.

Products

1. Injector Lv Ep Wet

Product Name			Injector Lv Ep Wet
Product Type / Technology			Two-part, moisture-insensitive epoxy injection resin
Product Overview			Solvent-free epoxy injection resin designed to seal damp, wet and submerged cracks under high-pressure injection while providing strong adhesion to concrete and steel in moisture-affected conditions.
Key Benefits			• Cures without shrinkage • High resistance to aggressive chemicals • Excellent adhesion to salt-water immersed cementitious substrates • Maintains high mechanical strength after underwater hardening
Best Suited For			Injection repair of damp, wet and submerged cracks where reliable epoxy bonding and water displacement are required.
Primary Applications			• Damp and wet crack injection • Submerged crack injection • Concrete and steel bonding in wet conditions • Horizontal and vertical crack injection
Pack Size			Pre-batched 3 kg set: Part A – 2 kg + Part B – 1 kg
Technical Highlight			Suitable for dry, damp and submerged conditions; maximum injectable crack width up to 5 mm.

Download TDS

2. Injector LV E70

Product Name			Injector LV E70
Product Type / Technology			Two-Pack Solvent-Free Epoxy System
Product Overview			A two-part, solvent-free epoxy system designed for injection grouting, waterproofing, concrete and structural priming, and protective applications. It combines good adhesion, chemical resistance, flexibility and high-build performance across demanding concrete and industrial environments.
Key Benefits			• Solvent-free system • Good adhesion • Tough and flexible coating helps absorb shocks • Good abrasion and chemical resistance
Best Suited For			Concrete and structural applications requiring epoxy priming, injection grouting, waterproofing or protective coating performance.
Primary Applications			• Injection grout • Waterproofing • Storage tanks • Pipelines • Sewage pipes and treatment plants • Flooring primer
Pack Size			Part A: 20 kg + Part B: 10 kg
Technical Highlight			2:1 mixing ratio by weight with high durability and chemical resistance.

Download TDS

3. Kesari Inject PU 1

Product Name			Kesari Inject PU 1
Product Type / Technology			Single-Component Hydrophobic Polyurethane Injection Grout
Product Overview			A ready-to-use, moisture-activated PU injection grout designed to stop persistent water leakage through cracks, joints and porous concrete. On contact with water, it reacts rapidly to form a closed-cell, rubber-like foam that creates a durable water barrier.
Key Benefits			• Expands to fill cracks, cavities and voids • Deep penetration into narrow and fine cracks • Excellent substrate adhesion • Fast-reacting, dimensionally stable and non-corrosive after curing
Best Suited For			Active water leakage, negative-side waterproofing and injection grouting in concrete structures, basements and underground applications.
Primary Applications			• Concrete cracks, honeycombs and porous areas • Concrete joints and brickwork • Tunnels, dams, metros and manholes • Basement curtain grouting and foundation leakage • Elevator pits and underground waterproofing
Pack Size			5 kg kit
Technical Highlight			Expands up to approximately 27 times its original volume; ready-to-use hydrophobic PU system.

Download TDS

Build Water Resistance into the Mix

Select the right integral waterproofing approach before concrete or mortar is placed.

Discuss the application, mix requirement and site condition with Kesari Conchem to identify the appropriate use of integral waterproofing within your concrete or mortar system.

Call Our Experts